Jetwave Specials

Wisycom Kit Deal

The Wisycom Kit Deal – Provides a total set of 1 x MCR42s wideband receiver with 1 x BPA42HPN and 2 x  Transmitters.

 

Wisycom Kit Deal Options:
1 x MCR42s 1 x BPA42HPN + 2 x MTP40S

Kit Cost: $4995

Wisycom MCR42S

MCR42 is a camera receiver designed for best-in-class performances. Four receivers are internally coupled by two in a real TRUE DIVERSITY CONFIGURATION. Its front end has a chain of microcontroller-driven movable filters to allow BROADBAND OPERATION up to 240 MHz with great selectivity.
A powerful low consumption DSP gives you the best of analog and digital technologies in a hybrid approach for smooth operations, high coverage and with our patented PTT (push to talk) already integrated.

FEATURES

  • Dual true diversity in a modular stand-alone or slot-in format.
  • Switching bandwidth up 240 MHz in the UHF range.
  • DSP based audio processing for unbeatable audio and digital outputs with our PTT (push to talk) patented technology already integrated.
  • 40 groups of 60 frequencies fully user programmable.
  • Multicompander operations
  • Infrared interface for programming and transmitter synchronization
  • Wisycom exclusive digital sub-carrier telemetry technology allows:
    – remote TX battery monitoring
    – tone-squelch operating
    – PTT function (An optional back-panel module is available, with the secondary intercom output)
  • Easy setup and operation thru a OLED display

Wisycom MTP40s

MTP40S is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP40S benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise and inter-modulation.
FEATURES
  • Up to 232 MHz bandwidth in 470/798 MHz range (others on request)
  • Input dynamic extension with an integrated HW limiter (30 dB above peak)
  • Enhanced robustness against self-interferences and antenna performances thru a proprietary “intermodulation cancellation” circuit
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Ultra-light metal alloy body (80g without batteries)
  • User selectable multi-companding systems:
    ENR (noise optimized)
    ENC (voice optimized)
  • Battery: 2 AA Alkaline, rechargeable NiMH or Lithium
  • Autonomy:
    > 7h @ 100mW output power
    > 10h @ 50mW output power
    > 14h @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 85dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
  • 48V phantom power to use wired mic thru the PHA48 accessory

Wisycom BPA42HPN

“Stand-alone” rear-panel
– 2 mini XLR-3pin male output (2 main analogue audio channel or 2 digital AES on 1st mini XLR)
– 1 locking mini jack Stereo Plug 3.5mm(TRS)
– 1 Hirose connector for external power
NOTE: to be used with proper back-panel (i.e. FLA42 or FLA42-SX)
NOTE: Audio/Power cable are not included